How to disinfect a toilet in seconds, with an Energizer disinfectant

I have a lot of friends who have been doing this for years.

I had a lot more friends who never used disinfectants because they were afraid of the chlorine gas.

Now I have two.

When I was in the military, we had to disinfect the toilets at Camp Lejeune, North Carolina, and it took a month to do it all in one.

The chlorine gas in the air was a problem, too, because people who didn’t use disinfectants would be coughing and sneezing all day long.

The military also had to get rid of the flammable liquids in the water, because the chlorine vapor was a big issue.

But once we did it, we were able to get the job done in a few hours.

And it really was a breeze.

A lot of people use this technology, but for me, this was probably the most efficient method.

We’ve been doing it for years, and I never once heard anyone complain about the cost.

So, how do you do it?

If you’re in the habit of doing this, you should have a pretty good idea how much it’s going to cost you.

The first thing you need to know is that the disinfectant itself is a lot less than you think it is.

It’s actually pretty inexpensive to disinfect an average toilet.

It can be purchased at most hardware stores, or it can be bought on Amazon, which is an extremely cheap service.

The main difference between these two methods is that you can buy this product online, so you don’t have to worry about paying shipping.

The disinfectant you’re going to need to use is a disinfectant that has been purified.

It needs to be purified, which means that you have to be able to smell it to know if it’s really disinfected.

The most common type of disinfectant is sodium hypochlorite, which has a lot fewer harmful chemicals than sodium hydroxide.

Sodium hypocholorite has been around for quite some time, but it’s also been used in a lot different products, and you can find it in many different types of household cleaners.

You can also use bleach, which makes it look white and makes it smell good, or you can use chloroform, which will make it look black and make it smell bad.

In my experience, the disinfection is pretty good.

When you get this thing, you’re basically putting a lot on a small surface and then spraying it with a little bit of water, and that’s it.

If you spray the disinfectants all over the place, you end up with a lot.

If there are a lot to disinfect, you can even spray it over a wall and leave the wall dry, which can help you get rid.

But if you don�t have to go through that hassle, it’s probably a good idea to do this before you do any other tasks, because you don?t want to waste the time of cleaning the house.

So what do you need?

You can use just the bleach or the chloro, or maybe you can mix them together.

You want to mix it until you get a good mixture of the disinfecting agents, so there shouldn?t be any problems at all.

It?s important to note that there are also other disinfectants that are a little less expensive.

The easiest is methyl alcohol, which costs a lot and is usually more effective at getting rid of things.

There are also disinfectants like sodium hypophosphate and sodium chlorate, which are a bit cheaper, but they aren?t as effective at disinfecting the toilet.

But these are the two disinfectants you should use, because they are the ones you need the most.

The third disinfectant to try is a bleach-based disinfectant called sodium hypoglycolate.

I have to say that this is the easiest of the three.

It doesn?t have the big smell that you get with sodium hydrolite or the chlorine-like smell of sodium hypozone.

So if you’re trying to disinfect your toilet, it?s a pretty simple task to make it happen.

It takes a couple of minutes.

You just pour the disinfector into a cup and fill it up with bleach.

You pour the bleach into the disinfected cup, and then you just let it sit there for a few minutes.

When the bleach is done, you pour the chlorine in, and wait a few seconds.

After that, you add the disinfecter back into the cup and repeat.

You should be able in about 20 seconds to do the whole process.

So there you have it.

Now, this is a pretty straightforward process, and if you have some friends who are really into it, you?ll be happy to show them how it’s done.

If they’re more into it than you are, you may want to ask them to go get their friends.

If that doesn?re too much for you, you could